Leaderboard_Block

New Products

Bulk Material Receiving Unit at Nickel Mine in New Caledonia

Example of a Samson bulk material receiving unit from Aumund.
Bulk Handling System
French Eramet Group, the supplier of the Doniambo nickel mine in New Caledonia, has installed a combination of a chain bucket elevator and a Samson bulk material receiving unit manufactured by Aumund Fördertechnik. Due to the special properties of the receiving unit, material can be unloaded directly from trucks or excavators without intermediate storage and transported by conveyor directly to the installation.

Reduce Grinding Media and Power Consumption

The Magnetic Mill Liners with the longest service life has been in operation for over 10 years.
Magnetic Mill Liners
According to Eriez, their Magnetic Mill Liners (MML) combine all of the best qualities of steel and magnetic liners to provide unmatched performance and protection. The wear resistant steel-encased magnet, designed for both secondary and regrind ball mills, lines the shell and mill heads to improve grinding efficiency and reduce power consumption while maintaining mill throughput.

Fike launches Valvex Explosion Protection Passive Isolation Valve

The ValvEx passive explosion isolation valve is designed to prevent flame and pressure propagation through interconnected pipes, ducts or conveying lines.
Explosion Protection
Fike Corporation announced the addition of a new ValveEx passive isolation explosion protection solution for dust aspiration and dilute-phase pneumatic conveyance systems to its line of products. The passive explosion isolation valve is designed to prevent flame and pressure propagation through interconnected pipes, ducts or conveying lines to additional process equipment or operating locations.

Level Sensor with simple and intuitive wireless Bluetooth Set-up

Continuous Level Measurement
Monitor Technologies has recently introduced advances to the SiloPatrol plumb bob style continuous level sensors that provide even easier set-up and increased flexibility for control system integration. Enhancements include wireless Bluetooth for simple, intuitive set-up without removing the sensor cover and Modbus connectivity to communicate with Modbus-compatible control systems.

Return Idler Cages – Cost-Effective Solutions for a safer Work

Belt Conveyor Safety
One of the most easily preventable conveyor accident sources is a dislodged return idler falling onto an unsuspecting worker. Misaligned belts often come into contact with return idler brackets, shearing them off and allowing the idler to break free. Return idler cages are a cost-effective solution to protect workers against such risk.

Transmitter/Intelligent Junction Box for Remote Scale System Monitoring

According to Transcell Technology, the LCT-2 transmitter/intelligent junction box costs about 50% less than the combination of separate devices.
Weight Measurement
Transcell has announced a digital weight transmitter, combined with an intelligent junction box, for high-speed, individual monitoring of up to four individual load cells. The unit is able to measure and transmit filtered weight data to a programmable logic controller (PLC) or other compatible host device, via Modbus protocol or Ether- Net/IPprotocol.

Bulk Bag Conditioning System helps prevent Breakage and Harm

Material Transfer & Storage Inc.'s bulk bag conditioning system returns agglomerated materials to a free-flowing state.
Bulk Bag Handling
Conditioning and emptying bulk bags with agglomerated material can be dangerous if the proper equipment is not utilized. The bulk bag conditioning system by Material Transfer & Storage, Inc. addresses concerns related to the commonly practiced "forklift conditioning method" such as bag breakage, plant structural damage, forklift damage, or injury to plant personnel.

Belt Positioning Systems make it possible to avoid Wear and Material Losses

Fig. 1: The PT Max series uses sensor rollers to detect whether the belt is starting to migrate. The belt is then guided back into its correct position. Depending on the application, the operator can install these systems either above ...
Belt Tracking
An important step in preventing material losses on conveyor belts is correcting the guidance of the conveyor belt. To achieve this, Flexco Europe GmbH offers a range of different belt positioning systems. Through the use of sensors, these detect misalignment of the belt and correct its directional precision. This also reduces or prevents damage to the edges of the conveyor belts. With these positioning systems, operators not only achieve substantial reductions in terms of material losses, they also reduce their maintenance costs.

Pages

Subscribe to New Products

Upcoming Events

Facebook