Measurement Systems

Ensuring Gypsum Quality

Elements of the ACO DMMS moisture measurement system installed at gypsum production process at E.On's MPP3 Power Plant.
Moisture Measurement
E.ON operate a modern coal- and bio-mass-fired power plant in the Maasvlakte port area in Rotterdam. The necessary desulphurisation is steadily controlled to produce a salable gypsum product. Its product quality is monitored via moisture measurement. Moisture measurement is also advisable to avoid caking in the whole process and to guarantee the best flow characteristics in all following transport systems.

Transmitter/Intelligent Junction Box for Remote Scale System Monitoring

According to Transcell Technology, the LCT-2 transmitter/intelligent junction box costs about 50% less than the combination of separate devices.
Weight Measurement
Transcell has announced a digital weight transmitter, combined with an intelligent junction box, for high-speed, individual monitoring of up to four individual load cells. The unit is able to measure and transmit filtered weight data to a programmable logic controller (PLC) or other compatible host device, via Modbus protocol or Ether- Net/IPprotocol.

3D Solids Scanners for accurate continuous Level and Volume Measurement

Emerson’s Rosemount 3D Solids Scanners provide level, volume and mass measurement of bulk solids and powders.
Level Measurement
Emerson Process Management developed the Rosemount 5708 Series of 3D Solids Scanners for the continuous measurement of level, volume and mass of bulk solids and powders in large vessels, bins and silos. The new series uses acoustic measurement and 3D mapping technologies to provide accurate and reliable results even when measuring uneven or sloping surfaces under dusty conditions.

Passive Monitor Technology

So­nartrac systems demonstrate a very stable output in the presence of a variety of ores, and demonstrate superior levels of performance.
Flow Monitoring
Cidra‘s sonar flow meter is the newest class of flow meter that has become the industry standard for slurry measurement. Sonartrac non-intrusive flow monitoring systems do not make contact with the slurry and can be removed and reinstalled without process interruption.

Continuous Level Control

Various probes allow the EB5 Series level transmitter to be used in a wide variety of level measuring applications in many industries.
Level Measurement
The EB5 Series RF admittance level transmitter from Finetek is used to measure the continuously changing level of granular, freely flowing powders. The level sensor includes a 4-20mA two-wire design and uses RF admittance technology to continuously measure the changing impedance between the sensor probe and the vessel metal wall.

Pages

Upcoming Events

Facebook